| |
MOLD CLEANUP, BACTERIA AND BIO HAZARD ABATEMENT AND CLEANUP.
A
few things to consider when hiring a Mold Inspection/Mold Cleanup
firm
-
How
long experience can be shown? We have 15 years experience working
with hazardous materials.
-
Do
the firm have references for completed jobs? We have hundreds of
references for completed Mold jobs.
-
Can
the firm perform a complete job, inspection, recommendations and
cleanup? We do all needed work, inspection, determine the scope
of work, complete cleanup and rebuilding.
-
What
kind of equipment is used? We use only state-of-the-art new equipment
on all mold jobs. Our research, experience and testing has led us
to get the best equipment and supplies available for Mold related
work.
-
Is
the firm licensed and bonded? We are licensed and bonded. Most of
our competitors are handyman, with no license, no insurance, no
address, no e-mail, no business card or website, only a truck and
a phone number.
-
Is
the firm insured for mold work? We have Mold coverage on our general
liability insurance.
-
Do
the firm work with other trades as well? We specialize in mold and
hazardous materials. That is our expertise.
-
Is
the firm reputable? We have excellent reputation among, clients,
architects, builders, consultants, Realtors, and governmental agencies.
-
Can
the firm perform analytical Mold test? We have a in-house Mold laboratory
for rush service, all samples are also sent to an independent laboratory
for confirmation test.
-
Can
the firm provide service if I need them right now? We can provide
same day inspection service and next day cleanup service. We have
done rush jobs many times and have the manpower and equipment available
to respond to emergencies.
-
Is
the prices reasonable or is the cost to high for ordinary home owners?
Our pricing is very competitive, most jobs can be done at a reasonable
cost. We accept payment plans and we can bill the insurance company
or escrow when needed. All our clients have referred us to others
and are satisfied with our service, pricing, and professionalism.
-
Can
the firm communicate via e-mail and Internet? We have been on the
Internet since 1995 and can provide pictures, reports and data posted
on the our website or e-mailed to our clients. We can hold a video
conference via the Internet using Netmeeting and use ICQ.
-
Can
the firm produce data and documentation that will hold up in court?
We keep our job files for the future and can locate old job files
within minutes. All data generated will hold up in court and some
staff are listed as expert witnesses.
-
How
do I know that the cleanup is done right? We test all chemicals
used to independently ensure that the right chemicals are used for
the job. We use state-of-the-art procedures including, containment
of work area, underpressure air filtration equipment, ozone generators,
tested chemicals, decontamination chambers, air samples and laboratory
testing. We have not had mold reoccurrence or complaint on any of
the hundreds of jobs we completed.
-
Why
not use an inspection firm and a separate cleanup firm? Both are
connected, a detailed inspection will be the basis for determining
the scope of work. Using two firms may result in both firms blaming
each other for the problem if the job fails. Most Mold inspectors
will not or cannot make recommendations or determine a scope of
work because of lack of experience. Most removal firms has no or
little experience with Mold. Some firms may have worked with water
damage repair but not mold, some other worked with asbestos removal
and bring in asbestos contaminated equipment into a nice home. Our
Mold equipment is used only for mold jobs, we have other equipment
for asbestos jobs and do not mix them. The experience we gained
over time doing inspections, survey, testing and cleanup is invaluable
and unsurpassed. That is why all our jobs are successfully completed
and our clients always recommend us..
-
Mold
cleanup jobs may involve asbestos, shall another firm be hired for
asbestos work? We are licensed and registered for asbestos work
and can complete any job including asbestos testing or removal.
If
you are still not convinced about who to call, contact our office to
ask any questions you may have.
Ask
for a Mold Expert, call 800-606-8007
Locate
an Mold Inspector in your area.
What
is this?
Mold Cleanup should be done as soon as possible after the problem has
been identified. If the conditions are right, mold can grow and spread
in a house within days. If you had water damage and need work done,
we advise not to wait for the insurance company to make their determination.
Take care of the problem ASAP to limit the damage. We do insurance work
and are willing to wait with payment, in some cases, until the insurance
company pay.
There is no time to allow biohazard jobs be handled by a "contractor
in training". Indoor pollutants causing "Sick Building Syndrome",
SBS, is not only hazardous to your health but also hazardous to the
economic life of your home, business or commercial building.
Serious health problems may develop from toxic mold and can occur a
short time after a leak has occurred. Leaking roofs, leaking galvanized
steel pipes, leaking copper pipes, water intrusion from soil and other
problems can cause mold start to grow in homes and offices, old and
new. Mold can develop in days and start release spores in the air inside
a home causing habitants to develop asthma, allergies, lung problem,
breathing problem, memory loss, and more. An initial survey may catch
a growing problem early to eliminate the risk of mold spreading to the
interior and contaminate furniture and personal property.
We have performed mold abatement, cleanup, leak detection, mold testing
drainage consulting issues, on hundreds of projects the last 6 years.
Mold and biological cleanup has been done in homes, apartment buildings,
office buildings, stores, hotels, hospitals, schools, churches, and
other buildings. A successful project will require, (1) finding the
source or sources of contamination, (2) testing, (3) sealing to eliminate
continued leaks or growth, (4) containment to prevent spread of spores,
(5) removal and proper disposal of walls or ceilings, (6) cleaning of
building components, (7) using applicable chemicals at correct dose,
concentration and application, (8) allow drying time, (9) application
of secondary chemicals, (10) final test. There are additional steps
involved but to many to list. Every stage of the process is important
to eliminate the risk for reoccurrence or exposure to workers and building
inhabitants. An example of one important step
in evaluating the chemicals used in mold cleanup.
We provide the following services;
- Highly experienced and qualified inspectors
for Inspection, survey, testing for mold and water damage. We provide
turnkey projects and solutions, not only testing and not only repair
and abatement.
- Testing for Vapor Emissions in concrete
slabs.
- Removal of mold infested building materials,
drying and salvage of documents and equipment.
- Cleaning, decontamination of mold infested
personal items in homes or offices.
- Repair and installation of new building
materials, as walls, ceilings, floors, roof, ducting, etc.
- Insulating buildings using impermeable
insulation materials in walls or under floors in crawlspaces to prevent
humidity to intrude.
- Rental of Effective Ozone gas generators.
Ozone generators will kill mold and eliminate odors.
- Rental of HEPA air cleaners with bio
hazards destruction filters.
A qualified, reputable abatement firm like ours should always be used
to ensure that airborne contaminants are controlled and that the problem
is permanently solved and will not reoccur. Our approach is to do the
job right the first time while saving our client money. We can have
your problem assessed, tested, and a plan of action and cleanup work
underway within a couple of days. Examples
of projects can be found here. Corporate clients and agencies are
advised to sign a retainer agreement with our firm to ensure timely
response in emergency events. We can have technicians and cleanup crew
or testing underway within hours for clients who we have retainer agreements
with.
For additional information,
initial consultation, proposal on mold abatement, mold and biohazard
testing, or air quality testing, please contact us at 800-606-8007
BACK
Emergency telephone number, 213-305-0840
|
|